- All Exams Instant Download
Which tool do you use to install license keys on a VSP G370 system?
Which tool do you use to install license keys on a VSP G370 system?A . HSA Embedded B. MPC Software C. Storage Navigator D. Maintenance UtilityView AnswerAnswer: D Explanation: Reference: https://knowledge.hitachivantara.com/Documents/Storage/VSP_G130_GF350_GF370_GF700_GF900/88-02-0x/System_Management_with_SVP/System_Configuration/14_Managing_license_keys
What is the valid CFM configuration?
A customer wants to upgrade a VSP G700 to 512 GB RAM capacity. What is the valid CFM configuration?A . two BM35 per controller B. two BM45 per controller C. one BM45 per controller D. two BM35 per systemView AnswerAnswer: B Explanation: Reference: https://www.hitachivantara.com/en-us/products/storage/storage-family/vsp-gx00
Which two reconfiguration activities are performed without interrupting host access on a VSP Gx00 system? (Choose two.) Choose 2 answers
Which two reconfiguration activities are performed without interrupting host access on a VSP Gx00 system? (Choose two.) Choose 2 answersA . adding a DKB B. adding a DB60 drive tray C. upgrading from G200 to G800 D. upgrading from G200 to G600View AnswerAnswer: A,B
Which set of IP addresses is configured with the ISW?
You are installing a new VSP G700 and are using the Initial Setup Wizard (ISW) for the network configuration. Which set of IP addresses is configured with the ISW?A . IP addresses of maintenance ports B. IP addresses of management ports C. IP addresses of all the ports D. IP...
What needs to be performed next?
A customer wants to change a production RAID group from RAID 5 (7D+1P) to RAID 6 (6D+2P) on a VSP G600 during normal operations. They have just unmapped the LUNs from the channel ports. What needs to be performed next?A . Parity groups must be deleted. B. The RAID level...
What are two valid back-end SAS cable connections on a VSP midrange system? (Choose two.)
What are two valid back-end SAS cable connections on a VSP midrange system? (Choose two.)A . from DKA to DKB B. from ENC to ENC C. from DKB to ENC D. from DKA to SSWView AnswerAnswer: A,C Explanation: Reference: https://knowledge.hitachivantara.com/Documents/Storage/VSP_G130_GF350_GF370_GF700_GF900/88-07-0x/About_Your_System/VSP_G900_Hardware/09_Data_and_power_cables
What are the two default IP addresses of the maintenance ports of CTL1 and CTL2?
You are installing a VSP F370 and you need to connect your laptop to one of the controllers. What are the two default IP addresses of the maintenance ports of CTL1 and CTL2? (Choose two.)A . 10.0.0.17 B. 10.0.0.16 C. 192.168.0.17 D. 192.168.0.16View AnswerAnswer: B,D Explanation: Reference: https://knowledge.hitachivantara.com/Documents/Storage/VSP_G130_GF350_GF370_GF700_GF900/88-03-0x/Installation/01_Installing_your_VSP_G%2F%2FF350_and_VSP_G%2F%2FF370_storage_system_that_includes_an_SVP
What are two functions of the LAN Blade in the VSP Midrange family? (Choose two.)
What are two functions of the LAN Blade in the VSP Midrange family? (Choose two.)A . It provides the LAN connection to the file module. B. It provides the maintenance port connecting to the MPC. C. It provides the iSCSI connection to the servers. D. It provides the management port...
Which program is used to perform the “New Installation” procedure on a VSP midrange system?
Which program is used to perform the “New Installation” procedure on a VSP midrange system?A . MPC B. Webconsole C. GUM D. BECKView AnswerAnswer: C Explanation: Reference: https://support.hitachivantara.com/download/epcra/hc2135.pdf
How many batteries does a VSP E1090 have per controller (CTL)?
How many batteries does a VSP E1090 have per controller (CTL)?A . 1 B. 2 C. 3 D. 4View AnswerAnswer: B
