- All Exams Instant Download
Now it is necessary to configure the OSPF protocol on the router MSR-1 to establish an adjacency relationship with MSR-2. Which of the following configurations is feasible?
Two MSR routers MSR-1 and MSR-2 are interconnected through the 192.168.1.0/24 network segment. Now it is necessary to configure the OSPF protocol on the router MSR-1 to establish an adjacency relationship with MSR-2. Which of the following configurations is feasible? (Multiple choice)A . MSR-1] ospf MSR-1-ospf-1] area 0 MSR-1-ospf-1-area-0.0.0.0] network...
There are 4 routes 172.16.0.0/24, 172.16.1.0/24, 172.16.2.0/24, 172.16.3.0/24 in the routing table.
There are 4 routes 172.16.0.0/24, 172.16.1.0/24, 172.16.2.0/24, 172.16.3.0/24 in the routing table. If route aggregation is to be performed, the correct route after aggregation is __________.A . 172.16.0.0/22 B. 172.16.0.0/23 C.172.16.0.0/24 D. 172.16.0.0/25View AnswerAnswer: A
Which of the following statements are correct about the availability of this network?
A certain local area network has been running for 2 years (17,520 hours), but it was stopped for 8 hours due to equipment failure. Later, after the network was expanded and new equipment was added, it ran for another year (8,760 hours), and was stopped for another 3 hours due...
In the OSPF protocol, when the interface network type is P2P (point-to-point), the default Hello time interval and neighbor failure time are ______ respectively.
In the OSPF protocol, when the interface network type is P2P (point-to-point), the default Hello time interval and neighbor failure time are ______ respectively. A . 10, 30 B. 10, 40 C. 30, 120 D. 40, 120View AnswerAnswer: B
In the OSPF broadcast network, there are 4 routers RTA, RTB, RTC and RTD in the same network segment, their priorities are 2, 2, 1 and 2 respectively, and the Router IDs are 172.16. 172.16.3.1 and 172.16.4.1.
In the OSPF broadcast network, there are 4 routers RTA, RTB, RTC and RTD in the same network segment, their priorities are 2, 2, 1 and 2 respectively, and the Router IDs are 172.16. 172.16.3.1 and 172.16.4.1. If the OSPF protocol is started on the four routers at the same...
As shown in the figure, the MSR router in the headquarters is connected to the branch through two 100Mbps Ethernet links. To make full use of the existing bandwidth resources, which of the following routing schemes is the best?
As shown in the figure, the MSR router in the headquarters is connected to the branch through two 100Mbps Ethernet links. To make full use of the existing bandwidth resources, which of the following routing schemes is the best? A . The two Ethernet links between the headquarters and the...
A certain local area network has been running for 2 years (17,520 hours), but it was stopped for 6 hours due to equipment failure. Later, after the network was expanded and new equipment was added, it ran for another year (8,760 hours), and was stopped for another 4 hours due to software failure. Which of the following statements are correct about the availability of this network? (Multiple choice)
A certain local area network has been running for 2 years (17,520 hours), but it was stopped for 6 hours due to equipment failure. Later, after the network was expanded and new equipment was added, it ran for another year (8,760 hours), and was stopped for another 4 hours due...
If the link between routers is congested, so that RTA cannot receive the Keepalive message sent by RTB, which of the following consequences will occur?
The routers RTA and RTB have established a BGP connection and learned routes from each other. Both RTA and RTB use default timers. If the link between routers is congested, so that RTA cannot receive the Keepalive message sent by RTB, which of the following consequences will occur?A . After...
L is a network design engineer. In a certain network project, in order to reduce the complexity, L designed the network to adopt a two-layer architecture, and the functions of the access layer were incorporated into the aggregation layer. When designing, L considered that the core layer needs to have a fast convergence function, and the aggregation layer performs route aggregation to reduce the number of routes. Among the following routing protocols, which one should L use as the core layer routing protocol? (Multiple choice)
L is a network design engineer. In a certain network project, in order to reduce the complexity, L designed the network to adopt a two-layer architecture, and the functions of the access layer were incorporated into the aggregation layer. When designing, L considered that the core layer needs to have...
As shown in the network diagram, RTA and RTB are located in AS 1001, RTC, RTD, and RTE are located in AS 1002, and AS 1001 advertises the BGP route 11.11.11.0/24 to AS 1002. The main BGP configurations of RTC and RTD are as follows, if RTE 1. The RTC interconnection link is interrupted, and RTE accesses the 11.11.11.0/24 network segment, which WAN link should be preferred?
As shown in the network diagram, RTA and RTB are located in AS 1001, RTC, RTD, and RTE are located in AS 1002, and AS 1001 advertises the BGP route 11.11.11.0/24 to AS 1002. The main BGP configurations of RTC and RTD are as follows, if RTE 1. The RTC...
