- All Exams Instant Download
The host PCA, PCB and PCC are respectively connected to the GigabitEthernet1/0/1 GigabitEthernet1/0/2 and GigabitEthernet1/0/3 ports of the switch SWA belong to VLAN2, VLAN3 and VLAN10, and the host ife addresses are in the same network segment. PCA Both PCC and PCB can access PCC, but PCA and PCB cannot communicate with each other. In the configuration process of SWA, which of the following configurations should be included ¬
The host PCA, PCB and PCC are respectively connected to the GigabitEthernet1/0/1 GigabitEthernet1/0/2 and GigabitEthernet1/0/3 ports of the switch SWA belong to VLAN2, VLAN3 and VLAN10, and the host ife addresses are in the same network segment. PCA Both PCC and PCB can access PCC, but PCA and PCB cannot...
GVRP is enabled on the switch SWA, and the Hold timer value is set to 100 centiseconds. Now you need to modify the value of other timers. The following configuration is correct
GVRP is enabled on the switch SWA, and the Hold timer value is set to 100 centiseconds. Now you need to modify the value of other timers. The following configuration is correctA . [SWA-Ethernet1/0/1]garptimer join 50B . [SWA-Ethernet1/0/1]garp timer join 200C . [SWA-Ethernet1/0/1]garptimer leave 400D . [SWA]garp timer leaveall 415View...
In the switching network as shown in the figure, all three switches only have the default VLAN 1, the interconnection ports of the three switches are Trunk, and all VLANs are allowed to pass, and the three switches have the global and port GVRP function enabled. VLAN 10 is created on the switch SVVA, VLAN 20 is created on the switch SWC, check the status information of each Trunk port on the three switches, the correct one is displayed below (choose one or more)
In the switching network as shown in the figure, all three switches only have the default VLAN 1, the interconnection ports of the three switches are Trunk, and all VLANs are allowed to pass, and the three switches have the global and port GVRP function enabled. VLAN 10 is created...
In NTP client and server mode, which of the following NTP authentication combinations can be successfully synchronized?
In NTP client and server mode, which of the following NTP authentication combinations can be successfully synchronized?A . Both NTP client and server enable authenticationB . Both NTP client and server are not enabled for authenticationC . Verification is enabled on the NTP client but not on the serverD ....
The switch SWA uses the factory default configuration. Now the Ethernet 1/0/1 port of the switch SWA should be configured as a trunk port, the PVID is VLAN20, and VLAN10 is allowed. The following configuration process is correct.
The switch SWA uses the factory default configuration. Now the Ethernet 1/0/1 port of the switch SWA should be configured as a trunk port, the PVID is VLAN20, and VLAN10 is allowed. The following configuration process is correct.A . [SWA]vlan10 [SWA-vlan10]quit [SWA]vlan 20 [SWA-vlan20]port Ethernet 1/0/1 [SWA-vlan20]quit [SWA]interface Ethernet 1/0/1...
The Ethemet1/0/1 port configuration of the switch SWA is as follows:
The Ethemet1/0/1 port configuration of the switch SWA is as follows: interface Ethernet 1/0/1 port link-type trunk port trunk permit vlan 10 port trunk pvid vlan 20 Now you need to modify the Ethernet 1/0/1 port of the switch SWA to a Hybrid port, the PVID is VLAN20, and the...
When using publickey authentication for SSH users, which descriptions are correct in terms of configuration keys?
When using publickey authentication for SSH users, which descriptions are correct in terms of configuration keys?A . Need to configure the client's RSA host private key on the server sideB . The client is required to specify the RSA private key corresponding to the host public key for the SSH...
Which of the following messages are TACACS+ authentication messages
Which of the following messages are TACACS+ authentication messagesA . startB . RequestC . RsponseD . ContinueView AnswerAnswer: AD
In a large local area network, what are the functional layers of the network?
In a large local area network, what are the functional layers of the network?A . Core layerB . Convergence layerC . Access layerD . ManagementView AnswerAnswer: ABC
In the network connection as shown in the figure, SWA and SWB enable STP and Loopback-detection at the same time. Please confirm that the port status description of SWA and SWB is correct.
In the network connection as shown in the figure, SWA and SWB enable STP and Loopback-detection at the same time. Please confirm that the port status description of SWA and SWB is correct.A . G1/0/1 of SWA may be blocked by STP detecting the existence of a loopB . STP...
