What is the recommended storage policy to ensure cross-site and local protection, using storage as efficiently as possible?
A planned VxRail Stretched Cluster will have four All-Flash nodes at each site What is the recommended storage policy to ensure cross-site and local protection, using storage as efficiently as possible?A . Site disaster tolerance - None - keep data on Preferred (stretched cluster) Failures to tolerate - 1 failure...
What must be done?
A VxRail cluster 4.7.xxx environment is managed by the internal vCenter Server. An implementation engineer plans to deploy a new VxRail cluster using the existing vCenter Server instance, then use the customer-supplied VDS to manage both VxRail clusters. What must be done?A . Migrate the internal vCenter Server to...
In addition to hardware monitoring, what is the purpose of the Dell PTAgent service on a VxRail node?
In addition to hardware monitoring, what is the purpose of the Dell PTAgent service on a VxRail node?A . Hardware discovery and firmware installationB . VxRail node discovery and software upgradesC . BOSS upgrade and firmware installationD . Hardware discovery and VxRail VIB installationView AnswerAnswer: A
What is a consideration when performing a VxRail software upgrade from version 4.7.xxx to version 7.0.xxx?
What is a consideration when performing a VxRail software upgrade from version 4.7.xxx to version 7.0.xxx?A . External vCenter server must be upgraded after the VxRail is upgradedB . vCenter Server requires a temporary IP address on a different subnet before the upgradeC . Secure boot must be enabled on...
What action does the engineer need to perform on each host once the upgrade has been completed?
A systems engineer is performing a VxRail upgrade in a VMware Horizon VDI cluster All hosts are put in Maintenance Mode. What action does the engineer need to perform on each host once the upgrade has been completed?A . From the Connection Server run IcMaintcmd to delete the parent VMs...
What is a consideration when adding nodes to a VxRail G Series chassis?
What is a consideration when adding nodes to a VxRail G Series chassis?A . G560 and G410 nodes are permitted in the same chassisB . In a full G Series chassis, all nodes must have 10GbE portsC . Hybrid and All-Flash nodes are permitted, if in different chassisD . All...
What licensing satisfies this requirement?
A company needs to enable vSphere GPU capabilities on their VxRail cluster. To do so, they need to purchase a specific entitlement. What licensing satisfies this requirement?A . vSphere Enterprise PlusB . vSAN Enterprise Plus EditionC . vSAN Advanced EditionD . vSphere StandardView AnswerAnswer: A
What is a valid 2-node VxRail cluster configuration?
What is a valid 2-node VxRail cluster configuration?A . 2x 10 GbE and 2x 25 GbE in a switch configuration and external vCenterB . 2x 1 GbE and 2x 10 GbE in a direct-connect configuration and external vCenterC . 2x 1 GbE and 2x 10 GbE in a switch configuration...
Match each VxRail API request with the information to be retrieved
DRAG DROP Match each VxRail API request with the information to be retrieved. View AnswerAnswer:
What is the correct sequence of steps to perform a RASR Factory Reset using an SD card?
DRAG DROP What is the correct sequence of steps to perform a RASR Factory Reset using an SD card? View AnswerAnswer: