- All Exams Instant Download
Which of the following should the technician do to improve performance?
The backups server connects to a NAS device using block-level storage over Ethernet. The performance is very slow, however, and the network technician suspects the performance issues are network related. Which of the following should the technician do to improve performance?A . Utilize UDP to eliminate packet overheadB . Turn...
Which I/O module is supported for Fabric B?
Which I/O module is supported for Fabric B?A . MX5016sB . MSG610sC . MX5000sD . MX5108nView AnswerAnswer: D Explanation: Reference: https://hasanmansur.com/2019/01/08/mx7000-networking-part-1-introduction-components/
To which IOM fabric(s) does the sled have access?
A server sled has a single mezzanine card installed in the correctly supported slot. To which IOM fabric(s) does the sled have access?A . Fabric A1 and Fabric A2B . Fabric A1 onlyC . Either Fabric A or Fabric B, depending on the configuration set in OME-MD . Fabric A1...
When performing “A1 the Box” management, what must be done to successfully connect to the Management Module?
When performing “A1 the Box” management, what must be done to successfully connect to the Management Module?A . Configure PuTTY for a serial connectionB . Change the baud rate to 128000C . Connect cables to the KVMD . Attach standard A-to-A USB cable to a laptopView AnswerAnswer: A
What must be used to reset the password?
A new administrator has just taken over an MX7000 Multi-Chassis Management Group and two-racks of PowerEdge servers. The previous administrator no longer works at the company and is not available. No one knows the password for the OME-M interface and the default password is not working. What must be used...
Upon logged in with administrator credentials on the switch, which command should be used to start the update procedure?
An administrator is about to perform a firmware update on an MX9116n switch OS 10 from the CLI. The latest OS 10 switch firmware image has been downloaded and their TFTP server is set up. Upon logged in with administrator credentials on the switch, which command should be used to...
What can be used as the firmware update source for OME-M within an MX chassis?
What can be used as the firmware update source for OME-M within an MX chassis?A . Server Update Utility Baseline from a CatalogB . Server Update Utility System Live Image (SLI)C . Dell Update package System Live Image (SLI)D . Dell Update Package Baseline from a CatalogView AnswerAnswer: D Explanation:...
You are creating a model-driven Power Apps app. You want to ensure that the app can be used by individuals who have vision impairments
HOTSPOT You are creating a model-driven Power Apps app. You want to ensure that the app can be used by individuals who have vision impairments. For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point. View...
What is a characteristic of MX7000 networking in Scalable Fabric Mode?
What is a characteristic of MX7000 networking in Scalable Fabric Mode?A . Enabled by default, all switch-specific OS10EE capabilities are available.B . Layer 2 bridging is disabled be default and interfaces must join a bridge domain (VLAN) before being to forward frames.C . All switch interfaces are assigned to VLAN...
Which management interface is recommended for managing this range of systems?
A company has several MX7000-systems, four FX2 solutions, one M1000e, and several PowerEdge rack servers. Which management interface is recommended for managing this range of systems?A . OpenManage Modular, no optional plugins requiredB . OpenManage EssentialsC . OpenManage Modular with optional pluginsD . OpenManage EnterpriseView AnswerAnswer: D Explanation: Reference: https://i.dell.com/sites/csdocuments/Product_Docs/en/PowerEdge-Modular-Quick-ReferenceGuide.pdf
