- All Exams Instant Download
Which micro controller-based module allows the Management Module to communicate with all the hardware present in a PowerEdge MX7000 chassis?
Which micro controller-based module allows the Management Module to communicate with all the hardware present in a PowerEdge MX7000 chassis?A . iDRACB . iSMC . ECD . FReDView AnswerAnswer: D
What operation was in progress when the power button was blinking green?
An administrator is asked to install and power-on a new MX740c sled in an MX7000 chassis. The administrator inserts the sled and presses the power button. They notice that the power button LED is blinking green. After a short time power button turns to solid green and the server finally...
What does OBPAR allow on a PowerEdge MX750c?
What does OBPAR allow on a PowerEdge MX750c?A . Run a compute sled with memory overclocking.B . Boot a compute sled with only one CPU.C . Run a compute sled with maximum performance.D . Boot a compute sled with reduced frequency.View AnswerAnswer: D
What configuration is supported for a fully populated MX740c compute sled?
What configuration is supported for a fully populated MX740c compute sled?A . 1 Fabric B mezz card 1 Fabric C mezz card with Fabric A being integrated into the system boardB . 1 Fabric A mezz card 1 Fabric B mezz card with Fabric C being integrated into the system...
What other Ethernet breakout configurations are supported?
The MX9116n FSE has two single-density QSFP28 port groups, and the default setting for these two ports is 1x 100GbE. What other Ethernet breakout configurations are supported?A . 4x 10GbE 1x 40GbE 8x 25GbE 2x 50GbEB . 4x 10GbE 1x 40GbE 4x 25GbE 2x 50GbEC . 4x 10GbE 1x 40GbE...
What location allows an administrator to enable DHCP for every iDRAC in the MX7000?
What location allows an administrator to enable DHCP for every iDRAC in the MX7000?A . Chassis Landing Page > Settings > Quick DeployB . Chassis Group Home Page > Compute > iDRAC NetworkingC . Chassis Landing Page > Devices > ComputeD . Chassis Landing Page > Settings > Network >...
What is the minimum OME-M version required to use ATMOS?
What is the minimum OME-M version required to use ATMOS?A . 1.40.00B . 2.00.00C . 2.10.00D . 1.60.50View AnswerAnswer: B
Which three components are required in an MX7000 chassis to allow multiple compute sleds to share access to the same disks in an MX5016s enclosure?
Which three components are required in an MX7000 chassis to allow multiple compute sleds to share access to the same disks in an MX5016s enclosure? (Select 3)A . PERC H745PMXB . Drive-assigned storage configurationC . MX5000s IOMD . Cluster-aware Operating SystemE . HBA 330MMZView AnswerAnswer: BDE
What LifeCycle Controller feature is used to complete this action?
An administrator is sending servers to other individuals but wants to reset the server to the factory default first. What LifeCycle Controller feature is used to complete this action?A . Repurpose or RetireB . Set BIOS to defaultsC . Delete RAID arrayD . RACADM RACRESETCFGView AnswerAnswer: A
Which I/O module is supported for Fabric B?
Which I/O module is supported for Fabric B?A . MX5016sB . MSG610sC . MX5000sD . MX5108nView AnswerAnswer: D
