- All Exams Instant Download
In a Layer 3 Leaf-Spine topology what can be used to move Layer 2 traffic between racks?
In a Layer 3 Leaf-Spine topology what can be used to move Layer 2 traffic between racks?A . VXLANB . TrunksC . Port channelD . VLTView AnswerAnswer: A
Which configuration supports the requirements?
A network administrator wants to configure a timing protocol with these requirements: - Hardware time stamping to achieve sub microsecond synchronization. - Master IP address: 192.168.1.100. - Use interface Ethernet 1/1/1 to enable timing protocol. Which configuration supports the requirements?A . OS10(config)# ptp clock boundary OS10(config)# ptp domain 1 OS10(config)#...
What caused the issue?
A customer reports they can no longer access their services and a network administrator has been assigned to investigate. A UFD disabled error status appears on all ports. What caused the issue?A . Spanning tree Loop-guard was implemented on the uplink-state group.B . One of the upstream interfaces is an...
Which best describes traffic flow in a campus network environment?
Which best describes traffic flow in a campus network environment?A . North-EastB . South-WestC . East-WestD . North-SouthView AnswerAnswer: C
With what feature is the downstream ethernet 1/1/9:1-1/1/9:4 command associated?
With what feature is the downstream ethernet 1/1/9:1-1/1/9:4 command associated?A . Downlink Failure DetectionB . Uplink Failure DetectionC . Unidirectional Forwarding DetectionD . Bidirectional Forwarding DetectionView AnswerAnswer: B
The VLAN tag is located between which fields in the Ethernet frame?
The VLAN tag is located between which fields in the Ethernet frame?A . Destination MAC and Source MACB . Ether Type/Size and DataC . Preamble and Destination MACD . Source MAC and Ether Type/SizeView AnswerAnswer: D
How are BGP neighbor relationships created?
How are BGP neighbor relationships created?A . Dynamically discovered when BGP is enabled on a specific interfaceB . Statically assigned using BGP MED (Multi-Exit Discriminator)C . Dynamically discovered using BGP Origin CodeD . Statically assigned using the IP address of the BGP neighborView AnswerAnswer: D
What is the default transmission interval of an LLDPDU in SmartFabric OS10?
What is the default transmission interval of an LLDPDU in SmartFabric OS10?A . 2B . 10C . 20D . 30View AnswerAnswer: B
Which three commands are used when deploying an automated Leaf and Spine topology using SFS?
Refer to the exhibit. Which three commands are used when deploying an automated Leaf and Spine topology using SFS? (Select 3)A . Leaf1(conf)# smartfabric l3fabric enable role LEAF vlti ethernet 1/1/10B . Spine1(conf)# smartfabric l3fabric enable role SPINE preferC . Spine1(conf)# smartfabric l3fabric enable role SPINE downstream ethernet 1/1/1-1/1/2D ....
When installing OS10 on a switch from a USB drive, what format is used for the file system?
When installing OS10 on a switch from a USB drive, what format is used for the file system?A . HFS+B . FAT32C . NTFSD . HFSView AnswerAnswer: B
