D-PDC-DY-23 V1

A network administrator must configure separate rendezvous points for multicast groups 232.0.0.100 and 225.0.0.100. Which commands are used for this configuration?A . OS10(config)# ip multicast rp-address 1.1.1.1 group-address 232.0.0.100/32 OS10(config)# ip multicast rp-address 2.2.2.2 group-address 225.0.0.100/32B . OS10(config)# ip pim rp-address 1.1.1.1 group-address 232.0.0.100/32 OS10(config)# ip pim rp-address 2.2.2.2 group-address...

What is the maximum number of LLDP neighbors supported per system with OS10?A . 250B . 256C . 384D . 512View AnswerAnswer: A

What is the size of the VLAN tag in an Ethernet frame?A . 4 bytesB . 8 bytesC . 1 byteD . 2 bytesView AnswerAnswer: A

Which multicast address do all OSPF routers use?A . 224.0.0.6B . 239.0.0.6C . 239.0.0.4D . 224.0.0.5View AnswerAnswer: D

You have been asked to examine a BGP configuration for a co-worker who is having difficulty establishing BGP peering. The address shown is that of the neighbor's Lo0 interface. Given the configuration shown, what would be your recommendation? S3(config-router-bgp-65042)# neighbor 192.168.32.1 S3(config-router-neighbor)# remote-as 65042A . Modify the existing configuration to...

A network administrator wants to configure a timing protocol with these requirements: - Hardware time stamping to achieve sub microsecond synchronization. - Master IP address: 192.168.1.100. - Use interface Ethernet 1/1/1 to enable timing protocol. Which configuration supports the requirements?A . OS10(config)# ptp clock boundary OS10(config)# ptp domain 1 OS10(config)#...

What does the stratum value of 16 mean on an NTP server?A . Device is a reference clock.B . Device has the highest synchronized accuracy.C . Device has the lowest synchronized accuracy.D . Device is unsynchronized.View AnswerAnswer: D

What is the function of UFD?A . Detects the loss of downstream activity.B . Load balances upstream activity.C . Prevents the loss of upstream activity.D . Detects the loss of upstream activity.View AnswerAnswer: D

A network administrator is troubleshooting a PBR implementation and needs to know how many packets have matched the route-map criteria. How do they view this information in OS10?A . OS10# show route-mapB . OS10# show interface statisticsC . OS10# show route-maproute-map-statisticsD . OS10# show route-mappbr-statisticsView AnswerAnswer: D

A network administrator is designing a Layer 2 topology and requires separate spanning- tree roots to avoid having a given port blocked for all instances. Which spanning-tree protocols will meet this need?A . STP & RSTPB . RSTP-PV & MSTPC . STP & RSTP-PVD . RSTP & MSTPView AnswerAnswer: B