- All Exams Instant Download
Which multicast address is used by all OSPF routers?
Which multicast address is used by all OSPF routers?A . 239.0.0.4B . 239.0.0.6C . 224.0.0.5D . 224.0.0.6View AnswerAnswer: C
What is a benefit of multicast over unicast and broadcast communication
What is a benefit of multicast over unicast and broadcast communicationA . Latency is mitigatedB . Bandwidth equally distributed to all devicesC . Minimum network bandwidth useD . Increase of the network loadView AnswerAnswer: C
What does the command aaa authentication login default group radius local do?
What does the command aaa authentication login default group radius local do?A . First, a RADUIS server authenticates the users. If the credentials are incorrect, the local router database is used.B . First, a RADUIS server authenticates the users. If the server fails to respond, a remote router database is...
What command can be used to verify that the policy is applied?
A network administrator has configured Policy-based-Routing and applied it on interface ethernet 1/1/3. What command can be used to verify that the policy is applied?A . show ip policy briefB . show ip policyC . show interface ethernet 1/1/3 policy-mapD . show ip policy mapView AnswerAnswer: B
What is the function of UFD?
What is the function of UFD?A . Detects the loss of downstream activity.B . Load balances upstream activity.C . Prevents the loss of upstream activity.D . Detects the loss of upstream activity.View AnswerAnswer: D
When using Policy-Based Routing, what is a valid action?
When using Policy-Based Routing, what is a valid action?A . Set source IP addressB . Drop packetC . Set destination TCP port numberD . Set 802.1Q VLAN IDView AnswerAnswer: B
Which IEEE standard defines the Multiple Spanning Tree Protocol?
Which IEEE standard defines the Multiple Spanning Tree Protocol?A . 802.1sB . 802.1wC . 802.1dD . 802.1adView AnswerAnswer: A
What are the correct steps to accomplish this?
A network administrator has to configure a virtual IP address using VRRP on interface VLAN 100 within OS10. What are the correct steps to accomplish this?A . OS10(config)# interface vlan 100 OS10(conf-if-vl-100)# ip address 10.0.100.2/24 OS10(conf-if-vl-100)# vrrp-group 256 OS10(conf-vlan100-vrid-256)# virtual-address 10.0.100.1B . OS10(config)# interface vlan 100 OS10(conf-if-vl-100)# ip address 10.0.100.2/24...
Where is the rendezvous point for the group 239.255.255.250?
Refer to the exhibit. Where is the rendezvous point for the group 239.255.255.250?A . 10.0.13.1B . 10.0.14.1C . eth1/1/54D . vlan300View AnswerAnswer: B
What is the default transmission interval of an LLDPDU in SmartFabric OS10?
What is the default transmission interval of an LLDPDU in SmartFabric OS10?A . 2B . 10C . 20D . 30View AnswerAnswer: D
