Site icon Exam4Training

DELL EMC DEA-5TT1 Associate – Networking Exam Online Training

Question #1

What are Network Address Translation (NAT) inside global addresses?

  • A . Addresses used by NAT router when sending frames to devices on the local network
  • B . Public IP addresses used by the local network to communicate with the Internet
  • C . Private IP addresses used by the local network
  • D . Pubic addresses used by other networks outside of the local network

Reveal Solution Hide Solution

Correct Answer: B
Question #2

Which topology is considered a best practice when stacking switches?

  • A . Ring
  • B . Cascade
  • C . Serial
  • D . Daisy-chain

Reveal Solution Hide Solution

Correct Answer: A
Question #3

Which option is used to configure Network Address Translation (NAT) to provide one-to-one mapping between local and global addresses?

  • A . Outside source static
  • B . Overload
  • C . Inside source static
  • D . PAT

Reveal Solution Hide Solution

Correct Answer: C
Question #4

What is the valid range assigned to a client during a TCP connection?

  • A . 20 – 25
  • B . 443 – 1000
  • C . 1023 – 2024
  • D . 40000 – 65535

Reveal Solution Hide Solution

Correct Answer: D
Question #5

Which port and protocol is used by NTP to communicate?

  • A . TCP port 123 for both the source and destination
  • B . TCP port 123 for the source and TCP port 80 for the destination
  • C . UDP port 123 for both the source and destination
  • D . UDP port 123 for the source and TCP port 80 for the destination

Reveal Solution Hide Solution

Correct Answer: C
Question #6

At which layer of the OSI model is the Rapid Spanning Tree protocol used to prevent switching loops?

  • A . Physical
  • B . Network
  • C . Data Link
  • D . Transport

Reveal Solution Hide Solution

Correct Answer: C
Question #7

Which field of the 802.3 frame is used by network interface cards to synchronize their receivers?

  • A . Start frame delimiter
  • B . Preamble
  • C . Cyclic redundancy check
  • D . Frame check sequence

Reveal Solution Hide Solution

Correct Answer: B
Question #8

Which type of domains are connected by a Layer 2 switch?

  • A . Single collision domain and a single broadcast domain
  • B . Multiple broadcast domains and multiple collision domains
  • C . Multiple collision domains and a single broadcast domain
  • D . Single collision domain and multiple broadcast domains

Reveal Solution Hide Solution

Correct Answer: C
Question #9

Which Layer 1 device can be used to enlarge the area covered by a single LAN segment?

  • A . Router
  • B . Repeater
  • C . Switch
  • D . NIC

Reveal Solution Hide Solution

Correct Answer: B
Question #10

What accurately describes the Simple Network Time Protocol (SNTP)?

  • A . Time synchronization algorithms are more complex and account for clock drift.
  • B . Client makes sudden changes in time to keep synchronized.
  • C . Client synchronizes among a set of distributed time servers.
  • D . Implemented on a Dell EMC Network OS 9 and OS 10.

Reveal Solution Hide Solution

Correct Answer: D

Question #11

Which criteria is used to define an extended MAC ACL filter?

  • A . Destination MAC address and Ethernet frame type
  • B . Ethernet frame type and frame size
  • C . Destination TCP port number and source MAC address
  • D . Source and destination MAC addresses

Reveal Solution Hide Solution

Correct Answer: D
Question #12

Which IPv4 address is in the same network as the IP address 182.15.24.40/23 and assignable to a host device?

  • A . 182.15.23.224
  • B . 182.15.25.0
  • C . 182.15.25.255
  • D . 182.15.26.10

Reveal Solution Hide Solution

Correct Answer: B
Question #13

Which BASE-T Ethernet standard specifies a CAT6 cable type?

  • A . 2.5GBASE-T
  • B . 5GBASE-T
  • C . 10BASE-T
  • D . 10GBASE-T

Reveal Solution Hide Solution

Correct Answer: D
Question #14

A network administrator created three VLANs on an Ethernet switch.

How many broadcast domains are created by the switch?

  • A . 1
  • B . 2
  • C . 3
  • D . 4

Reveal Solution Hide Solution

Correct Answer: C
Question #15

DRAG DROP

What is the correct sequence of steps that occur in the communications between the client and server to obtain an IP address from a DHCP server?

Reveal Solution Hide Solution

Correct Answer:


Exit mobile version