DELL EMC D-VPX-DY-A-24 Dell VPLEX Deploy Achievement Online Training
DELL EMC D-VPX-DY-A-24 Online Training
The questions for D-VPX-DY-A-24 were last updated at Nov 26,2024.
- Exam Code: D-VPX-DY-A-24
- Exam Name: Dell VPLEX Deploy Achievement
- Certification Provider: DELL EMC
- Latest update: Nov 26,2024
In addition to Active Directory, with what other directory service can VPLEX integrate for user authentication?
- A . LDAP
- B . NIS
- C . NDS
- D . PAM
A customer has ordered a two-engine VPLEX cluster to be installed in a custom rack. A minimal VNX5300 is already installed in the middle of the rack, occupying nine rack unit spaces.
What is the correct approach to deploy the two-engine VPLEX cluster?
- A . The engines and SPSs can be placed under the VNX5300 and the other components above the VNX5300 using longer cables.
- B . Use a rack with sufficient space to install all the VPLEX cluster components together according to the predefined EMC layout.
- C . The installation of a two engine cluster is not supported in a customer rack without a formal EMC RPQ.
- D . The EMC account team must order a factory installed VPLEX two engine configuration and ship the custom install VPLEX back to EMC.
What information is required to configure ESRS fo r VPLEX?
- A . VPLEX model type Top Level Assembly Site ID IP address of the Management Server public port
- B . Top Level Assembly Site ID IP address of the Management Server public port VPLEX Configuration (1, 2 or 4 Engines)
- C . VPLEX model type Top Level Assembly Primary customer contact IP address of the Management Server public port
- D . VPLEX model type Site ID IP address of the Management Server public port Primary Customer contact
According to EMC best practices, how many metadata volumes for a VPLEX Metro configuration are required on each cluster?
- A . 4 Metadata volumes and 4 Metadata Backup volumes
- B . 2 Metadata volumes and 1 Metadata Backup volume
- C . 2 Metadata volumes and 2 Metadata Backup volumes
- D . 4 Metadata Volumes and no Metadata Backup volumes
Which VPLEX management NIC Interface must be connected to customer IP public LAN?
- A . eth3
- B . eth2
- C . eth1
- D . eth0
Which VPLEX management interface is used for initial configuration?
- A . eth3
- B . eth2
- C . eth0
- D . eth1
Where is the wwn-seed physically located on VS2 engines?
- A . On the back of the engine on the bottom of the chassis
- B . On the front of the management server
- C . On the front of the director
- D . On the front of the director bezel cover
Refer to the exhibit.
You have created a Distributed Device in a VPLEX Metro. You want to confirm you have chosen the correct volumes before performing a device mobility job within cluster-2. Which object will be the source for this operation?
- A . DD_8_32012Nov26_183659
- B . extent_Symm0841_03A7_1
- C . Symm0841_03A7
- D . DD_7_3
You are zoning a dual-engine Local VPLEX cluster to a Symmetrix array to see LUNs 0010 and 0020 for metadata backups.
How many directors in the cluster must be zoned and masked to these LUNs?
- A . All of the directors
- B . Any two directors
- C . One from each engine
- D . Only one director
A customer has purchased a dual engine VPLEX Metro cluster. During installation, there are not enough free SAN ports to connect all WAN-COM ports to the SAN. What is the recommended approach?
- A . The customer must connect the WAN-COM ports of the first engine only and disable the second engine from the VPLEX CLI.
- B . It is sufficient to connect the WAN-COM ports of either engine 1 or 2 because redundancy is provided by leveraging two separate SAN fabrics.
- C . The customer must provide additional SAN ports or acquire additional SAN ports to connect all WAN-COM ports of both VPLEX engines to the SAN.
- D . The customer must connect the WAN-COM ports of the first engine only and disable the second engine from the Unisphere for VPLEX GUI.
Latest D-VPX-DY-A-24 Dumps Valid Version with 187 Q&As
Latest And Valid Q&A | Instant Download | Once Fail, Full Refund
