DELL EMC D-RP-DY-A-24 Dell RecoverPoint Deploy Achievement Online Training
DELL EMC D-RP-DY-A-24 Online Training
The questions for D-RP-DY-A-24 were last updated at Nov 20,2024.
- Exam Code: D-RP-DY-A-24
- Exam Name: Dell RecoverPoint Deploy Achievement
- Certification Provider: DELL EMC
- Latest update: Nov 20,2024
You are responsible for installing a four-node RPA cluster. All RPAs are powered on. Both the FC and IP networks are connected, zoned, and routed properly. The RPAs are loaded with the latest image and IP addresses are set. However, Deployment Manager cannot discover RPAs.
What is a possible cause?
- A . Port 22 not open between host running Deployment Manager and RPAs
- B . Deployment Manager host and RPAs on different subnets
- C . DHCP not used to set IP addresses for RPAs
- D . RPAs not installed separately using Deployment Manager
When choosing a journal for a CG what would be a factor in selecting which LUNs to use?
- A . Volumes that are all close to the same size
- B . Volumes masked to the production host
- C . Any volume less than 10 GB
- D . Only thin LUNs
After expanding to include an additional existing RecoverPoint cluster you use Deployment Manager to connect the clusters, but it fails.
What might be the problem?
- A . New cluster is already licensed
- B . RPAs at second cluster are not same type
- C . Second cluster not yet added to Repository
- D . No splitter added to second cluster
After expanding to include an additional existing RecoverPoint cluster you use Deployment Manager to connect the clusters, but it fails.
What might be the problem?
- A . New cluster has existing Consistency Group
- B . RPAs at second cluster are not same type
- C . Second cluster not yet added to the Repository
- D . No splitter added to second cluster
A new RecoverPoint system is being installed and the RPAs need to be upgraded to the latest version.
How should this be done?
- A . Choose the option to upgrade the RPA version from an ISO while installing RecoverPoint using Deployment Manager.
- B . Before doing the install ensure all the RPAs IP addresses reach each other. Connect to RPA1 with boxmgmt and do the upgrade.
- C . Install the new system with Deployment Manager and then log in as boxmgmt and perform the upgrade on one RPA.
- D . Upgrade the RPAs to the latest version first; otherwise Deployment Manager will prevent the installation.
After installing two RecoverPoint clusters you find that a Consistency Group cannot be configured with a remote copy.
Why?
- A . Deployment Manager was not used to connect the clusters.
- B . The RPAs at the second cluster are not the same type (virtual vs physical).
- C . The second cluster has not yet been added to the Repository.
- D . There is no splitter added to the second cluster.
A customer is interested in implementing a RecoverPoint solution using a four-node cluster with physical RPAs.
How many total IP addresses are required for the cluster?
- A . 4
- B . 5
- C . 8
- D . 9
A customer wants to implement a two-node RecoverPoint solution with local replication. How many IP addresses are required for each cluster?
- A . 2
- B . 3
- C . 4
- D . 5
A customer environment includes a two-cluster RecoverPoint/SE instance. They have a new data center 100 km away that they wish to protect with RecoverPoint.
What steps are required to connect a new cluster to their existing RecoverPoint instance?
- A . Use Deployment Manager to convert the existing instance to RP/EX. Use Deployment Manager to connect the new cluster to the existing instance. Install RP/EX licenses for their existing arrays.
- B . Use Deployment Manager to connect the new cluster to the existing instance.
- C . Install RP/SE licenses for their existing arrays. Install RP/SE licenses for the new cluster. Use Deployment Manager to connect the new cluster to the existing instance.
- D . Install RP/CL licenses for their existing cluster. Use Deployment Manager to connect the new cluster to the existing instance.
A customer environment includes a two-cluster RecoverPoint/SE instance. They have a new data center 500 km away that they wish to protect with RecoverPoint.
What steps are required to connect a new cluster to their existing RecoverPoint instance?
- A . Use Deployment Manager to convert the existing instance to RP/EX. Use Deployment Manager to connect the new cluster to the existing instance. Install RP/EX licenses for their existing arrays.
- B . Use Deployment Manager to connect the new cluster to the existing instance.
- C . Install RP/SE licenses for their existing arrays. Install RP/SE licenses for the new cluster. Use Deployment Manager to connect the new cluster to the existing instance.
- D . Install RP/CL licenses for their existing cluster. Use Deployment Manager to connect the new cluster to the existing instance.
Latest D-RP-DY-A-24 Dumps Valid Version with 200 Q&As
Latest And Valid Q&A | Instant Download | Once Fail, Full Refund
