DELL EMC D-PE-OE-23 Dell Technologies PowerEdge Operate 2023 Online Training
DELL EMC D-PE-OE-23 Online Training
The questions for D-PE-OE-23 were last updated at Nov 23,2024.
- Exam Code: D-PE-OE-23
- Exam Name: Dell Technologies PowerEdge Operate 2023
- Certification Provider: DELL EMC
- Latest update: Nov 23,2024
An existing server is transferred to a new location. The technician is directed to change the information displayed on the LCD located on the front bezel to show the ambient temperature.
What is a consideration for the technician?
- A . LCD information can be configured for displaying ambient temperature using the iDRAC GUI.
- B . iDRAC Enterprise license must be installed to allow the LCD information to be changed.
- C . Ambient temperature information cannot be displayed on the LCD.
- D . LCD information can only be configured to display the Service Tag and any errors that occur.
Refer to the exhibit.
A system administrator wants to monitor information about the system using their smartphone and a Bluetooth connection. LED labeled 3 on the control panel is solid white.
What does the LED indicate?
- A . The system is powered on.
- B . Quick SYNC 2 is ready to communicate.
- C . OMM is transferring data.
- D . The system is in failsafe mode.
What does OBPAR allow on a PowerEdge MX750c?
- A . Run a compute sled with memory overclocking.
- B . Boot a compute sled with only one CPU.
- C . Run a compute sled with maximum performance.
- D . Boot a compute sled with reduced frequency.
A company’s servers were ordered with iDRAC Enterprise with vFlash. The server profile was backed up after the first boot. Changes have been made to the server BIOS settings and firmware versions, which have resulted in many performance issues.
What is the most efficient way for the technician to address the performance issues?
- A . Upload the approved corporate firmware versions from the file share
- B . Restore system profile using the iDRAC or Lifecycle Controller
- C . Run the racadm racresetcfg command to reset all server settings
- D . Reboot the server to F10 and perform System Repurpose/Retire
A technician resets the iDRAC but when they attempt to log back in to the iDRAC is offline.
Why is the iDRAC offline?
- A . DRAC has reset to the default IP address of 192.168.0.120
- B . Technician must use iDRAC Direct to enable the iDRAC network
- C . iDRAC is still in the reset process
- D . Technician must move the iDRAC network cable back to the iDRAC dedicated NIC
A technician has the ISO image of an OS that they need to install on a server in a remote location. They are already logged into the iDRAC.
How should the technician install the OS?
- A . Click Launch under the Virtual Console Preview, Select Next Boot, and choose Virtual CD/DVD/ISO
- B . Click Launch under the Virtual Console Preview and then connect to Virtual Media
- C . Click Launch under the Virtual Console Preview, reboot the server into F10, and start the Lifecycle Controller OS Deployment wizard
- D . Click on Update and Rollback under Quick Launch Tasks
From PERC8 to PERC9, the maximum number of individual drives upon which a virtual disk can be created changed.
How did this value change?
- A . 8 to 32
- B . 16 to 64
- C . 16 to 32
- D . 8 to 16
A user has a number of PowerEdge servers and installs OME on a remote system to monitor the servers. When attempting to discover one of the servers, the discovery process is unsuccessful. The user accesses the Troubleshooting tool to establish that the communication pathway is correct.
After entering the server iDRAC IP address, which network protocol should be selected to communicate with the iDRAC?
- A . SNMP
- B . IPMI
- C . In-Band
- D . WS-MAN
A technician is tasked to perform a RAID Level Migration (RLM) of a RAID 5 array to a RAID 6 array. They back up data and look in iDRAC Storage and find that the current RAID 5 array is sliced into two virtual disks.
What should the technician do to achieve the desired RAID level?
- A . Reboot and press Ctrl-R to complete RAID migration
- B . Use iDRAC GUI under Storage Configuration to delete the arrays and recreate the new RAID 6 array
- C . Open the OpenManage Enterprise GUI, delete the arrays, and recreate the new RAID 6 array
- D . Use SupportAssist Enterprise to complete RAID migration
A technician needs to initially configure a server from a bare metal condition in the following areas:
– Processor settings
– Disk configuration
– iDRAC network settings
The technician can only reboot once to achieve these tasks.
Where should the technician configure these settings? (Choose three.)
- A . PXE Settings
- B . System BIOS
- C . PERC Configuration Utility
- D . iDRAC Settings
- E . Device Settings
Latest D-PE-OE-23 Dumps Valid Version with 270 Q&As
Latest And Valid Q&A | Instant Download | Once Fail, Full Refund
