DELL EMC D-PE-OE-23 Dell Technologies PowerEdge Operate 2023 Online Training
DELL EMC D-PE-OE-23 Online Training
The questions for D-PE-OE-23 were last updated at Nov 19,2024.
- Exam Code: D-PE-OE-23
- Exam Name: Dell Technologies PowerEdge Operate 2023
- Certification Provider: DELL EMC
- Latest update: Nov 19,2024
A technician wants to remotely log in to a server but finds that the IDRAC virtual Console feature Is not available. Use the simulator to explore the system.
What Is the cause of this Issue? Note: It is necessary to dose (x) the simulator window before you can select a response to this question.
- A . The Virtual Console is disabled
- B . Operating system not installed on remote server
- C . The server has been powered down
- D . There are more than the maximum number of active sessions
What is a requirement to operate GPUs in a Dell EMC PowerEdge R740 server?
- A . All GPU cards must be installed at the same time
- B . All GPU cards must be of the same type but can be a different model
- C . All GPU cards must be of the same type and model
- D . All GPU cards must be installed on the same riser card
What happens when the Hardware Root of Trust fails to validate the BIOS?
- A . Boot Guard switches over to the backup BIOS and logs a warning in the system event log.
- B . Automated BIOS Recovery process recovers the BIOS from the DUP saved in the control panel.
- C . The server continues running and logs a critical error in the system event log.
- D . The server shuts down and logs a critical error in the system event log.
A technician receives a new server with five drives.
They need to configure the drives based on the following requirements received from the administrator:
– Drive 0 as a single disk with no RAID
– Drives 1-3 as a RAID 5 with drive 4 as a hot spare just for this newly created RAID 5
The administrator plans to add more disks as separate RAID arrays at a later date but only wants drive 4 to be available for this first RAID 5 set.
How should the technician configure the drives?
- A . Set drive 0 to Ready; set drives 1-3 as RAID 5; set drive 4 as a Global Hot Spare
- B . Set drive 0 to Non-Raid; set drives 1-3 as RAID 5; set drive 4 as a Dedicated Hot Spare
- C . Set drive 0 to Non-Raid; set drives 1-3 as RAID 5; set drive 4 as a Global Hot Spare
- D . Set drive 0 to Ready; set drives 1-3 as RAID 5; set drive 4 as a Dedicated Hot Spare
A technician must update the firmware on a savor, but has no network connectivity.
What can the technician use to update the BIOS and iDRAC/ lifecycle Controller firmware?
- A . OpenManage Server administrator DVD
- B . ftp dell.com
- C . NFS share
- D . USB key with Dell Update Package
A Dell EMC PowerEdge server has been updated with an LCC and iDRAC DUP to the latest firmware when performing a firmware rollback?
- A . The LCC can be rolled back; the iDRAC cannot be rolled back
- B . The iDRAC cannot be rolled back and the LCC cannot be rolled back
- C . The iDRAC can be rolled back; the LCC cannot be rolled back
- D . Both the iDRAC and the LCC can be rolled back
A technician wants to configure the iDRAC on a new server using the iDRAC Quick Sync 2 feature.
What is required to use this feature?
- A . OpenManage Mobile App installed on an Android or iOS device
- B . OpenManage Mobile App installed on a laptop
- C . Quick Sync enabled bezel
- D . iDRAC Enterprise license
Which is responsible for controlling the NVMe disks, when using a Paddle Card in a PowerEdge 15G server?
- A . S150
- B . HBA355
- C . H745
A technician needs to configure a server to allow the OS to manipulate processor frequencies for higher power efficiency.
Which setting can they enable to achieve this?
- A . Logical Processing
- B . Performance per Watt (DAPC)
- C . Adjacent Cache Line Prefetch
- D . Performance per Watt (OS)
How can a system administrator compare the currently installed hardware to the original system configuration?
- A . Pull a SupportAssist Collection Comparison Report
- B . Restore the original System Profile
- C . View Factory Shipped Inventory
- D . Export a Tech Support Report