DELL EMC D-PDC-DY-23 Dell PowerSwitch Data Center Deploy 2023 Online Training
DELL EMC D-PDC-DY-23 Online Training
The questions for D-PDC-DY-23 were last updated at Nov 23,2024.
- Exam Code: D-PDC-DY-23
- Exam Name: Dell PowerSwitch Data Center Deploy 2023
- Certification Provider: DELL EMC
- Latest update: Nov 23,2024
A network administrator is designing a Layer 2 topology and requires separate spanning- tree roots to avoid having a given port blocked for all instances.
Which spanning-tree protocols will meet this need?
- A . STP & RSTP
- B . RSTP-PV & MSTP
- C . STP & RSTP-PV
- D . RSTP & MSTP
What configuration must be common on iBGP neighbors to form an iBGP adjacency?
- A . Local preference
- B . Router-ID
- C . AS number
- D . Loopback interfaces
Refer to the exhibit.
The output shown is from which command?
- A . S3(config-router-ospf-1)# show ip ospf database
- B . S3(config-router-ospf-1)# show ip ospf topology
- C . S3(config-router-ospf-1)# show ip ospf lsa
- D . S3(config-router-ospf-1)# show ip ospf statistics
A router must be configured to allow multiple multicast servers for the same group to be presented only to ports where active listeners reside. Each listener may exclude non-preferred servers.
What is the minimum multicast configuration level required on the router?
- A . IGMPv2 with snooping PIM-SSM
- B . IGMPv3 with snooping PIM-SSM
- C . IGMPv3 with snooping PIM-SM
- D . IGMPv3 without snooping PIM-SSM
A router needs to be configured to allow multiple multicast servers for the same group to be presented only to ports where active listeners reside. Each listener may exclude non-preferred servers.
What is the minimum multicast configuration level required on the router?
- A . IGMPv3 without snooping PIM-SSM
- B . IGMPv2 with snooping PIM-SSM
- C . IGMPv3 with snooping PIM-SSM
- D . IGMPv3 with snooping PIM-SM
How many VRRP groups can be configured on a VRRP router?
- A . 128
- B . 255
- C . 256
- D . 512
ACL’s have which two (2) actions?
- A . Redistribute or forward
- B . Forward or erase
- C . Permit or deny
- D . Modify or drop
Multicast flood restrict is a feature enabled by default on OS10 switches to ensure that no traffic drop occurs.
What is a recommended configuration step for its implementation?
- A . Configure the interface between the PIM routers as a dynamic multicast router port
- B . Enable IGMP snooping on the VLAN interfaces between two PIM routers with no IGMP receivers
- C . Disable IGMP snooping on the VLAN between two PIM routers with no IGMP receivers on that VLAN
- D . Configure the interface between the PIM routers and the rendezvous point as a static multicast router port
What is the range of values that can be used when using the vlt-port-channel command?
- A . 1-128
- B . 1-512
- C . 1-1024
- D . 1-256
A network administrator must configure separate rendezvous points for multicast groups 232.0.0.100 and 225.0.0.100.
Which commands are used for this configuration?
- A . OS10(config)# ip multicast rp-address 1.1.1.1 group-address 232.0.0.100/32
OS10(config)# ip multicast rp-address 2.2.2.2 group-address 225.0.0.100/32 - B . OS10(config)# ip pim rp-address 1.1.1.1 group-address 232.0.0.100/32
OS10(config)# ip pim rp-address 2.2.2.2 group-address 225.0.0.100/32 - C . OS10(config)# ip pim rp-address 232.0.0.100/32 group-address 1.1.1.1
OS10(config)# ip pim rp-address 225.0.0.100/32 group-address 2.2.2.2 - D . OS10(config)# ip pim rp-address 232.0.0.100/32 source-address 1.1.1.1
OS10(config)# ip pim rp-address 225.0.0.100/32 source-address 2.2.2.2
Latest D-PDC-DY-23 Dumps Valid Version with 155 Q&As
Latest And Valid Q&A | Instant Download | Once Fail, Full Refund
