DELL EMC D-PCM-DY-23 Dell PowerSwitch Campus Deploy 2023 Online Training
DELL EMC D-PCM-DY-23 Online Training
The questions for D-PCM-DY-23 were last updated at Nov 19,2024.
- Exam Code: D-PCM-DY-23
- Exam Name: Dell PowerSwitch Campus Deploy 2023
- Certification Provider: DELL EMC
- Latest update: Nov 19,2024
Which technology is designed to protect against a default gateway failure and downtime in the Dell PowerSwitch N-Series switches?
- A . CARP
- B . VRRP
- C . MLAG
- D . HSRP
A network administrator is having trouble successfully upgrading the firmware on a Dell EMC N-Series switch.
Which transfer protocol should be the last option if all others are not responding?
- A . FTP
- B . HTTP
- C . XMODEM
- D . TFTP
A network administrator is setting up a Class 5 powered device in their network.
Which Dell EMC N-Serves switch model(s) will support this device?
- A . N1100P and N2000P
- B . N1500P
- C . N2000 and N3000P
- D . N3000P only
A Dell EMC N3048P with two power supplies is configured for Class-Based Power Management.
The switch has the following devices connected and fully operational:
10x 802.3af PDs negotiating as Class0 devices
10x 802.3af PDs negotiating as Class4 devices
10x 802.3at PDs negotiating as Class4 devices
How much power is reserved from the PSE budget by the devices referenced above?
- A . 462 Watts
- B . 650 Watts
- C . 838 Watts
- D . 1026 Watts
To which destination MAC address are MLAG peer-keepalive packets sent?
- A . 01:00:B5:00:00:00
- B . 01:00:C5:00:00:00
- C . B5:00:01:00:00:00
- D . C5:00:01:00:00:00
Which command is used to display the current VLAN and switchport settings?
- A . show interfaces switchport
- B . show interfaces traffic
- C . show vlan
- D . show interfaces status
Which AAA method is only used for 802.1x and never returns an error?
- A . local
- B . enable
- C . ias
- D . line
What is the maximum number of dynamic MAC addresses that can be learned on a Dell EMC N-Series switchport that is configured for dynamic locking?
- A . 100
- B . 300
- C . 400
- D . 600
When configuring a Dell EMC N-Series switch for voice traffic, which settings are needed?
- A . Enable voice VLAN Set each-interface to LLDP share all VoIP related parameters Set switchport mode to general
- B . Create a VLAN for voice Set each interface to ISDP share all VoIP related parameters Set switchport mode to general
- C . Enable voice VLAN Set each interface to LLDP share all VoIP related parameters Set switchport mode to hybrid
- D . Enable voice VLAN Set each interface to ISDP share all VoIP related parameters Set switchport mode to general
How many untagged VLANs are allowed on a switchport mode trunk interface?
- A . 0
- B . 1
- C . 128
- D . 4096
Latest D-PCM-DY-23 Dumps Valid Version with 170 Q&As
Latest And Valid Q&A | Instant Download | Once Fail, Full Refund
