CWNP CWT-101 CWNP Certified Wireless Technician (CWT) Online Training
CWNP CWT-101 Online Training
The questions for CWT-101 were last updated at Apr 27,2025.
- Exam Code: CWT-101
- Exam Name: CWNP Certified Wireless Technician (CWT)
- Certification Provider: CWNP
- Latest update: Apr 27,2025
You are receiving reports from several users that their clients connect with very low data rates. All reports are confined to a particular area in the facility and the users report that the problem does not occur with the same devices in other areas.
What is most likely problem in that area?
- A . High SNR
- B . Improper AP security configuration
- C . Poor signal strength
- D . Improper client security configuration
Some APs come with a captive portal available within the AP, controller or cloud interface. For what would this captive portal most likely be used?
- A . Guest access
- B . Employee access
- C . Executive management access
- D . Long-term contractor access
What best describes passive scanning used to locate WLANs?
- A . Listening for beacon frames from the APs
- B . Scanning in only on frequency band
- C . Sending probe requests and listening for probe responses
- D . Scanning on only one channel
An AP has two Ethernet ports on the back and another port that looks similar to an Ethernet port.
For most enterprise APs, how many of these ports can be used for Power over Ethernet (PoE)?
- A . 1
- B . 3
- C . 0
- D . 2
What is defined as the bending of an RF wave as it passes through a medium?
- A . Reflection
- B . Refraction
- C . Absorption
- D . Scattering
What is one possible cause of mobility problems in a wireless network if the fast roaming method used by the client is not supported by the access point?
- A . Configuration errors
- B . Improper network settings
- C . Unsupported fast roaming methods
- D . Non-implemented roaming features
How can a device report the strength of the RF signal it is receiving?
- A . Wireless scanner tools
- B . Client signal strength reports
- C . RSSI vs. dBm
- D . Output power vs. received signal strength
Which factor can negatively impact wireless signal strength and cause connectivity issues?
- A . Configuration errors
- B . Interference
- C . Supplicant issues
- D . Co-channel interference (CCI)
Which process in the WLAN connection sequence establishes the encryption keys between the client device and the access point?
- A . Authentication
- B . Association
- C . 802.1X/EAP authentication
- D . 4-way handshake
What is one possible cause of security problems in a wireless network if the EAP method used by the client is not supported by the access point?
- A . Configuration errors
- B . Incorrect passphrases
- C . Incompatible EAP methods
- D . Incorrect network keys
Latest CWT-101 Dumps Valid Version with 140 Q&As
Latest And Valid Q&A | Instant Download | Once Fail, Full Refund
