CWNP CWNA-107 Certified Wireless Network Administrator Online Training
CWNP CWNA-107 Online Training
The questions for CWNA-107 were last updated at Apr 26,2025.
- Exam Code: CWNA-107
- Exam Name: Certified Wireless Network Administrator
- Certification Provider: CWNP
- Latest update: Apr 26,2025
A dual-band 802.11ac AP must be powered by PoE.
As a class 4 device, what power level should be received at the AP?
- A . 30 W
- B . 25.5 W
- C . 15.4 W
- D . 12.95 W
A WLAN is implemented using wireless controllers. The APs must locate the controllers when powered on and connected to the network.
Which one of the following methods is commonly used to locate the controllers by the APs?
- A . DHCP
- B . GRE
- C . NTP
- D . SNMP
You are implementing a multi-AP WLAN and fast secure roaming is essential.
Which one of the following methods is an IEEE 802.11 standard method for fast roaming?
- A . Band steering
- B . FT
- C . OKC
- D . Load balancing
In an 802.11 2.4 GHz system, what 22 MHz channels are considered non-overlapping?
- A . 11 and 6
- B . 7 and 11
- C . 1 and 5
- D . 2 and 8
The center frequency of channel 1 in the 2.4 GHz band is 2.412 GHz (2412 MHz).
What is the center frequency of channel 4?
- A . 2.413
- B . 2.427
- C . 2.422
- D . 2.417
The requirements for a WLAN you are installing state that it must support unidirectional delays of less than 150 ms and the signal strength at all receivers can be no lower than -67 dBm.
What application is likely used that demands these requirements?
- A . E-Mail
- B . RTLS
- C . VoIP
- D . FTP
You are deploying a WLAN with the access points configured for 10 mW of output power on the 2.4 GHz radios and 20mW of output power on the 5GHz radios. Some semi-directional antennas are also in use.
What kind of deployment is described?
- A . High density
- B . SOHO
- C . Standard office
- D . Residential
Option 43 must be configured to allow access points to locate controllers. In what network service should this option be configured?
- A . DHCP
- B . LDAP
- C . DNS
- D . RADIUS
What statement about 802.3, Clause 33 Power over Ethernet is true?
- A . Only midspan PSEs are supported.
- B . The lowest voltage drop is achieved when using CAT6 instead of Cat5 or CAT5e.
- C . Only endpoint PSEs are supported.
- D . When using CAT5 cabling, you increase the maximum draw available to the PD over that available with CAT6.
What statement describes the authorization component of a AAA implementation?
- A . Validating client device credentials against a database.
- B . Implementing a WIPS as a full-time monitoring solution to enforce policies.
- C . Granting access to specific network services or resources according to a user profile.
- D . Verifying that a user is who he says he is.
Latest CWNA-107 Dumps Valid Version with 118 Q&As
Latest And Valid Q&A | Instant Download | Once Fail, Full Refund
