RCDD-002

Which electrical characteristic is displayed with the correct preferred value?A . Dielectric constant C high valueB . Dielectric strength C high valueC . Dissipation factor C low valueD . Insulation resistance - high valueView AnswerAnswer: A

If the input signal power to a communication system is 1 W and the output power is 1 mW, the system attenuation is:A . 3 dBB . 20 dBC . 30 dBD . 40 dBE . 1000 dBView AnswerAnswer: C

Which of the following is NOT true about consolidation points?A . They are not to be used for direct connections to active equipment.B . They allow horizontal cables to be extended into work area pathways.C . They are to be terminated on separate connectors for each individual user.D . The...

From a 1000 ft (305 m) roll of optical fiber, how many MAXIMUM length centralized optical fiber cabling runs can be made?A . 1B . 2C . 3D . 4E . 5View AnswerAnswer: C

A SONET OC-1 channel can carry 672 voice signals and has a data rate of 51.84 Mbps. A SONET OC-48 channel can carry 32,256 voice channels. What MINIMUM data rate is required for the OC-48 channel?A . 155 MbpsB . 622 MbpsC . 2.5 GbpsD . 5 GbpsE . 10...

Which of the following is true about screened twisted pair cable assemblies?A . The drain wire and screen foil must be bonded at one end only.B . The drain wire and screen foil must be bonded at every connection.C . There is no need to bond the screen foil or...

A reasonable approximation for the signal speed in 100 ohm balanced twisted pair cable is__________, where c is the velocity of light in free space.A . 0.2 cB . 0.4 cC . 0.6 cD . 08 cE . 0.9 cView AnswerAnswer: C

The MINIMUM separation distance between grounded metal telecommunications pathway and unshielded power lines is:A . 75 mm (3 in)B . 150 mm (6 in)C . 300 mm (12 in)D . 610 mm (24 in)E . 1220 mm (48 in)View AnswerAnswer: C

One advantage of using preconnectorized jumpers and cables is:A . They are less costly than field connectorized connectorsB . The cables are more rugged and can handle higher pull tensionsC . They come with factory certified quality of terminationsD . They require additional engineering time thereby providing a higher degree...

In reviewing your client's network needs for today and 5 years into the future, you note their current specs call for a 1Gb/s network within a campus environment, with little or no possibility of any increased bandwidth demands until they move to their planned future site. The building is not...