BICSI RCDD-001 BICSI Registered Communications Distribution Designer – RCDD Online Training
BICSI RCDD-001 Online Training
The questions for RCDD-001 were last updated at Apr 25,2025.
- Exam Code: RCDD-001
- Exam Name: BICSI Registered Communications Distribution Designer - RCDD
- Certification Provider: BICSI
- Latest update: Apr 25,2025
Which of the following is NOT a design consideration for broadband video distribution?
- A . Amplifier link budgets
- B . Adhering to the 90 meter (295 feet) rule for horizontal distribution
- C . Amplifier cascade limitations
- D . Environmental factors
- E . Drop length
The RJ-45 is now known as the 8P8C style connector, per the Telecommunications Industry Association (TIA) standard.
What does the P and C stand for?
- A . Plug and connector
- B . Position and connector
- C . Position and contact
- D . Plug and contact
Which of the following is true about screened twisted pair cable assemblies?
- A . The drain wire and screen foil must be bonded at one end only.
- B . The drain wire and screen foil must be bonded at every connection.
- C . There is no need to bond the screen foil or drain because it is not important.
- D . The drain wire and screen foil must be separately bonded at opposite ends.
If looking to specify an optical fiber backbone within a building going 275 m (902 ft) between the equipment room (ER) and the telecommunications room (TR), what type of fiber should be specified to support a 10 GB ethernet application?
- A . OM1
- B . 50 micron multimode
- C . 50 micron laser optimized multimode
- D . 62.5 micron multimode
This type of cable is an unbalanced system:
- A . Unshielded twisted-pair (UTP)
- B . Shielded twisted-pair (STP)
- C . Screened twisted-pair (ScTP)
- D . Coaxial
The ability of a conductors insulation to transmit an electric field is called:
- A . Conductivity
- B . Transmitability
- C . Permittivity
- D . Capacitance
- E . Reactance
What type of fiber optic cable is manufactured to protect individual glass strands and is primarily designed for use inside buildings?
- A . Ribbon
- B . Tight buffered
- C . Loose tube
- D . Air blown
You are extending 1000 MHz video service from your existing headend to a new equipment room (ER). Your existing incoming video signal is plus (+) 15 dBmV. You have three two-way splitters with a total of minus (-) 15 dB. You are adding 122 m (400 ft) of series 11 (RG 11) cable with a minus (-) 18 dB with eight single end F-connectors with a total of minus (-) 1.2 dB. From the selections below, what is the MINIMUM gain amplifier required in the headend room?
- A . Plus (+) 15 dB
- B . Plus (+) 20 dB
- C . Plus (+) 25 dB
- D . Plus (+) 30 dB
- E . Plus (+) 35 dB
Which of the following is NOT a type of connector for optical fiber?
- A . LC
- B . ST
- C . SFF
- D . S/FTP
- E . SC
The MINIMUM separation distance between grounded metal telecommunications pathway and unshielded power lines is:
- A . 75 mm (3 in)
- B . 150 mm (6 in)
- C . 300 mm (12 in)
- D . 610 mm (24 in)
- E . 1220 mm (48 in)
Latest RCDD-001 Dumps Valid Version with 358 Q&As
Latest And Valid Q&A | Instant Download | Once Fail, Full Refund
