Axis ANVE Axis Network Video Exam Online Training
Axis ANVE Online Training
The questions for ANVE were last updated at Nov 23,2024.
- Exam Code: ANVE
- Exam Name: Axis Network Video Exam
- Certification Provider: Axis
- Latest update: Nov 23,2024
A customer is not getting the storage retention they had expected while using H.264 with an AXIS Q6034-E PTZ camera on a continuous guard tour.
What is the most likely cause of the problem?
- A . The estimation was only planned for a 720p HDTV PTZ
- B . Using continuous guard tour does not let H.264 save as much on the compression
- C . Because most of the areas in the guard tour are empty. H.264 cannot save as much on the compression
- D . The estimations were done in MPEG-4 and they should change the AXIS Q6034-E to run in MPEG-4 instead of H.264
After an installer sets up a motion detection window they then zoom out the camera.
How will this affect the camera’s ability to detect motion if no settings are changed?
- A . More pixels are needed to change to trigger motion detection
- B . Less pixels are needed to change to trigger motion detection
- C . More movement needed to change to trigger motion detection
- D . Less movement needed to change to trigger motion detection
Working with the end user, you find that they need a cost-effective mini dome with a varifocal lens. DC-iris and audio capabilities are not required.
Which of the following products would best fit the requirements?
- A . AXIS P3343
- B . AXIS P3301
- C . AXIS M1113
- D . AXIS M3204
Before upgrading firmware, which of the following should be checked?
- A . Verify that the Video Management Software (VMS) supports the latest firmware version
- B . Verify that both rack mounted and standalone servers support the latest firmware version
- C . Verify that the IEEE 802.3af compliant PoE switch supports the latest firmware version
- D . Verify that the SD card is properly ejected before the upgrade is started
Image flickering is caused by
- A . IR light
- B . White light
- C . Lack of light
- D . Fluorescent light
In a dark indoor environment one single Axis illuminator is available. At a distance of 1 m (3 ft 3 in) away from the illuminator the light intensity is 1024 lux.
At what distance from the light source will the light intensity be 256 lux?
- A . 2m (6 ft 7 in)
- B . 4m {13 ft 1 in)
- C . 8m (26 ft 3 in)
- D . 16m (52 ft 6 in)
Which statement is true for broadcast network traffic?
- A . Broadcast is designed to enable optimized video transmission, since it tolerates network dropouts
- B . Broadcast is not practical for network video transmission, since packets are transmitted to every device on the network
- C . Broadcast is a method for sending video to many recipients over the internet even though their bandwidths vary
- D . Broadcast data packet length is longer than normal Ethernet packets, to accommodate a full video frame
The purpose of a DNS server is to
- A . Allocate IP addresses to devices within a network.
- B . Allocate MAC addresses to devices within a network.
- C . Translate host names such as www.axis.com to IP addresses.
- D . Translate host names such as www.axis.com to MAC addresses.
What is the benefit of deinterlacing the video in a video encoder?
- A . It gives the encoded video a higher frame rate compared to the analog input video
- B . It reduces the tearing effects when there is movement between two fields in one frame
- C . It enhances the dynamic range between two fields in one frame
- D . It decreases the bandwidth needed to transmit the compressed video
How does the AXIS Design Tool allow users to estimate the effects of scene complexity and motion on bandwidth and storage usage?
- A . AXIS Design Tool requires users to manually enter their own estimated bit rate for each camera
- B . Users can view model scenario videos and select the scenario that best matches their scene
- C . Users can upload recorded surveillance video to allow AXIS Design Tool to make estimates
- D . AXIS Design Tool uses a statistical model based on selected camera model