Axis ANVE Axis Network Video Exam Online Training
Axis ANVE Online Training
The questions for ANVE were last updated at Nov 19,2024.
- Exam Code: ANVE
- Exam Name: Axis Network Video Exam
- Certification Provider: Axis
- Latest update: Nov 19,2024
Which of the following allows customer to access between 2-4 channels of live and online stored video at any time?
- A . AXIS Camera Station
- B . AXIS Video Hosting System (AVHS)
- C . AXIS Camera Management
- D . AXIS Media Control
Axis recommends shielded cables for outdoor installations primarily to ensure
- A . Image quality.
- B . Surge protection.
- C . Life time of cable installations.
- D . Conformity with SMPTE standard.
In setting up PTZ control for an Axis encoder, it’s very easy to overlook a very important step in the configuration process. After properly connecting the communication wires to the encoder, the next recommended step in the setup is:
- A . Downloading the correct Device ID from the Axis website
- B . Setting the Baud Rate to match the analog PTZ’ s
- C . Setting the Device ID to match the analog ID
- D . Uploading the correct PTZ driver
Which setting would best adjust a hard yellow tint as shown in the pictures below?
- A . Image contrast
- B . White balance
- C . Color saturation
- D . Image brightness
Which is an impact on cameras that are operating above their specified temperature limit?
- A . Noise is increased
- B . Frame rate is reduced
- C . Light sensitivity is decreased
- D . Resolution is reduced
Which technology can a Video Management Software (VMS) partner incorporate to reduce the impact on recorded video during server maintenance?
- A . Local storage at the camera
- B . Meta data stream
- C . AXIS Camera Application Platform (ACAP)
- D . SNMP
A customer has a lot of motion blur on recordings from a fixed camera.
What would be the most likely setting to address the blurring?
- A . Gain level
- B . Brightness
- C . Backlight compensation
- D . Shutter speed
Which statement is true regarding H.264 and Motion JPEG?
- A . The highest bandwidth savings using H.264 compared to Motion JPEG is at high frame rates
- B . Bandwidth savings using H.264 has nothing to do with frame rate, only scene complexity
- C . Bandwidth savings using H.264 has nothing to do with frame rate, only Group of Video (GOV) setting
- D . The highest bandwidth savings using H.264 compared to Motion JPEG is at low frame rates
Which of the following will allow a customer to have a PTZ camera automatically change between three predefined positions?
- A . Configure the camera’s I/O ports to control the preset positions
- B . Use the Guard Tour capability to switch between the preset positions
- C . Switch between the predefined positions using a joystick
- D . Use the auto tracking capability to switch between the preset positions
In a network surveillance installation, the purpose of a router is to
- A . Forward the video stream between networks.
- B . Forward the video stream to the correct receiver within a network.
- C . Separate audio and video traffic to reduce audio latency.
- D . Separate the video stream from the camera control signaling.
Latest ANVE Dumps Valid Version with 145 Q&As
Latest And Valid Q&A | Instant Download | Once Fail, Full Refund
