After the configuration is complete, can you tell which one the PCA will join?

The IP address of host PCA is 40.1.1.1, and the MAC address is 0011.1111.1111. It is connected to the GigabitEthernet1/0/1 port of switch SWA. The following commands are configured on switch SWA:

[SWA] vlan 10

[SWA-vlan10] quit

[SWA] vlan 20

[SWA-vlan20] protocol-vlan ipv4

[SWA-vlan20] quit

[SWA] vlan 30 [SWA-vlan30] quit

[SWA] mac-vlan mac-address 0011-1111-1111 vlan 30

[SWA] vlan 40

[SWA-vlan40] ip-subnet-vlan ip 50.1.1.0 255.255.255.0

[SWA-vlan40] quit

[SWA] interface GigabitEthernet 1/0/1

[SWA-GigabitEthernet1/0/1] port link-type hybrid

[SWA-GigabitEthernet1/0/1] port hybrid pvid vlan 10

[SWA-GigabitEthernet1/0/1] port hybrid vlan 10 20 30 40 untagged

[SWA-GigabitEthernet1/0/1] port hybrid protocol-vlan vlan 20 0

[SWA-GigabitEthernet1/0/1] port hybrid ip-subnet-vlan vlan 40

[SWA-GigabitEthernet1/0/1] mac-vlan enable

[SWA-GigabitEthernet1/0/1] vlan precedence ip-subnet-vlan

After the configuration is complete, can you tell which one the PCA will join?

A. VLAN 10

B. VLAN 20

C. VLAN 30

D. VLAN 40