Nutanix NCSC Level-1 Nutanix Certified Services Consultant (NCSC): Level 1 Online Training
Nutanix NCSC Level-1 Online Training
The questions for NCSC Level-1 were last updated at Nov 22,2024.
- Exam Code: NCSC Level-1
- Exam Name: Nutanix Certified Services Consultant (NCSC): Level 1
- Certification Provider: Nutanix
- Latest update: Nov 22,2024
Which subnet is reserved for internal connectivity within a Nutanix Cluster?
- A . 192.168.5.0/24
- B . 192.168.254.0/24
- C . 192.168.5.0/23
- D . 192.168.5.0/26
A customer has an ESXi Cluster with two 10GbE NICs on each node with the following requirements:
* Solution must follow Nutanix Best Practices
* Network configuration should be redundant
* A vSphere Standard Switch must be utilized
Which load balancing method should be used?
- A . Route based on originating port ID
- B . Route based on physical NIC load
- C . Route based on IP hash
- D . Route based on source MAC hash
A customer wants to know the details of network validation testing.
Where can the consultant find this information?
- A . Handover checklist
- B . Test plan
- C . Operations Guides
- D . As-Built Guide
A consultant creates an AHV cluster and connects the Intel X550T NICs to the top of rack switch using Twinax cables. The activity and link lights are green. The cluster cannot communicate over the 10GbE link.
What is the first command the consultant should perform to troubleshoot the issue?
- A . manage_ovs show_bridges
- B . manage_ovs show_interfaces
- C . manage_ovs update_uplinks
- D . manage_ovs show_uplinks
A consultant is viewing an ESXi host via console without external network connectivity.
Which two IP addresses can be used to connect to the CVM (Choose two.)
- A . 192.168.5.253
- B . 192.168.5.2
- C . 192.168.5.254
- D . 192.168.5.1
A consultant is setting up a new vSphere cluster. Customer requirements are as follows:
* VMs should automatically failover to another host if the host crashes
* Host CPU and Memory resources should be evenly balanced
* New VMs should be placed on the host with the most resources available
Which two settings should be turned on to meet the requirements? (Choose two.)
- A . vShpere DRS
- B . vSphere HA
- C . vSphere vMotion
- D . vSphere Power Management
A consultant is planning an installation and needs to collect configuration items to be used during the install. The data needed from the customer are IP addresses, Gateway, DNS servers, and NTP Servers.
Which Cluster Deployment document must be completed with the customer?
- A . Project Plan
- B . Operations Guide
- C . Questionnaire
- D . Technical Checklist
A consultant creates a Windows VM after installing a new Nutanix cluster running AHV. The consultant has statically assigned an IP address to the VM but it is unable to communicate on the network.
Which action should the consultant take to resolve this issue?
- A . Confirm that IPv6 is enabled on the guest VM.
- B . Confirm that the VM vNIC is tied to the correct VLAN in Prism Element.
- C . Mount and install the Nutanix Guest Tools.
- D . Set a Group Policy to make sure the Windows Firewall is disabled.
A consultant is onsite with a customer running Foundation VM (FVM) and discovers that
there is no connectivity between the FVM and their laptop.
The consultant verifies the following:
* The consultant’s laptop and Nutanix nodes are plugged into a flat switch.
* The laptop, switch and nodes are plugged into supported power supplies.
* The laptop network adapters and FVM are configured with their corresponding IP addresses.
What is the cause for the connectivity failure to the FVM?
- A . The switch is not plugged into the power supply.
- B . Desktop Firewall is blocking ping requests.
- C . Network cables are not connected.
- D . Laptop WiFi configured to use DHCP.
A customer would like to re-image an existing cluster. The Foundation Applet and Foundation VM is unavailable to them.
How can the consultant access Foundation-as-a-Service (FaaS)?
- A . Through <cluster-IP> :9443
- B . Through <cluster-IP> :8000
- C . Through <CVM-IP> :9443
- D . Through <CVM-IP> :8000