What is the result of enabling this command?

Scenario:

The following four questions concern the Nexus 7010’ s which are configured as a vPC pair at the core of a Data Center network. You can utilize all the available show commands to answer the Questions Access to the running-configuration is not allowed.

Instructions:

Enter NX-OS commands on 7K-3 and 7K-4 to verity network operation and answer four multiple-choice questions

THIS TASK DOES NOT REQUIRE DEVICE CONFIGURATION.

Click on the switch to gain access to the console of the switch. No console or enable passwords are required.

To access the multiple-choice questions, click on the numbered boxes on the loft of the top panel.

There are four multiple-choice questions with this task Be sure to answer all four questions before selecting the Next button

Topology:

Within the vpc configuration of the 7K’s. the command peer-gateway is configured as confirmed with the command show vpc.

What is the result of enabling this command?
A . Enables 7K-3 to act as the active gateway for packets received on VLAN 101 that are addressed to the MAC address of 7K-4
B . Enables 7K-4 to use of the vpc peer link for forwarding packets received on VLAN 100 that are addressed to the MAC address of 7K-3
C . Generates IP redirect messages for packets switched through the peer-gateway router
D . Causes the HSRP active router to update the ARP table on the standby router for faster convergence after the vPC peer link has flapped
E . Allows the vpc peers to coordinate the LACP ID which must be the same on all links on the port-channel

View Answer

Answer: D