VMware 2V0-41.24 VMware NSX 4.X Professional V2 Online Training
VMware 2V0-41.24 Online Training
The questions for 2V0-41.24 were last updated at Feb 25,2025.
- Exam Code: 2V0-41.24
- Exam Name: VMware NSX 4.X Professional V2
- Certification Provider: VMware
- Latest update: Feb 25,2025
What is the VMware recommended way to deploy a virtual NSX Edge Node?
- A . Through the NSX Ul
- B . Through automated or interactive mode using an ISO
- C . Through the vSphere Web Client
- D . Through the OVF command line tool
Which three selections are capabilities of Network Topology? (Choose three.)
- A . Display how the different NSX components are interconnected.
- B . Display the VMs connected to Segments.
- C . Display how the Physical components are interconnected.
- D . Display the uplinks configured on the Tier-1 Gateways.
- E . Display the uplinks configured on the Tier-0 Gateways.
An NSX administrator has deployed a single NSX Manager node and will be adding two additional nodes to form a 3-node NSX Management Cluster for a production environment. The administrator will deploy these two additional nodes and Cluster VIP using the NSX UI.
What two are the prerequisites for this configuration? (Choose two.)
- A . The cluster configuration must be completed using API.
- B . All nodes must be in the same subnet.
- C . All nodes must be in separate subnets.
- D . A compute manager must be configured.
- E . NSX Manager must reside on a Windows Server.
Which two commands does an NSX administrator use to check the IP address of the VMkernel port for the Geneve protocol on the ESXi transport node? (Choose two.)
- A . net-dvs
- B . esxcfg-nics -l
- C . esxcli network ip interface ipv4 get
- D . esxcfg-vmknic -l
- E . esxcli network nic list
Which two are supported by L2 VPN clients? (Choose two.)
- A . NSX Autonomous Edge
- B . NSX Edge
- C . NSX for vSphere Edge
- D . 3rd party Hardware VPN Device
As part of an organization’s IT security compliance requirement, NSX Manager must be configured for 2FA (two-factor authentication).
What should an NSX administrator have ready before the integration can be configured?
- A . Active Directory LDAP integration with ADFS
- B . VMware Identity Manager with NSX added as a Web Application
- C . VMware Identity Manager with an OAuth Client added
- D . Active Directory LDAP integration with OAuth Client added
What should an NSX administrator check to verify that VMware Identity Manager integration is successful?
- A . From the NSX Ul the status of the VMv/are Identity Manager Integration must be Enabled’
- B . From the NSX CLI the status of the VMware Identity Manager Integration must be Configured’
- C . From VMware Identity Manager the status of the remote access application must be green
- D . From the NSX Ul the URI in the address bar must have locaMalstf part of it.
An administrator has been tasked with implementing the SSL certificates for the NSX Manager Cluster VIP.
Which is the correct way to implement this change?
- A . Send an API call to https://<nsx-mgr>/api/vl/cluster/api-certificate?action=set_cluster_certificate&certificate_id=<certificate_id>
- B . Send an API call to https://<nsx-
mgr>/api/vl/node/services/http?action=apply_certificate&certificate_id=<certificate_id> - C . SSH as admin into the NSX manager with the cluster VIP IP and run nsxcli cluster certificate node install <certificate_id>
- D . SSH as admin into the NSX manager with the cluster VIP IP and run nsxcli cluster certificate vip install <certificate_id>
An administrator wants to validate the BGP connection status between the Tier-0 Gateway and the upstream physical router.
What sequence of commands could be used to check this status on NSX Edge node?
- A . – enable <LR-D>
– get vrf <ID>
– show bgp neighbor B.
– get gateways
– vrf <number>
– get bgp neighbor C.
– set vrf <ID>
– show logical-routers
– show <LR-D> bgp D.
– show logical-routers
– get vrf
– show ip route bgp
What is VMware’s recommendation for the minimum MTU requirements when planning an NSX deployment?
- A . MTU should be set to 1700 or greater across the data center network including inter-data center connections.
- B . MTU should be set to 1500 or less only on inter-data center connections.
- C . Configure Path MTU Discovery and rely on fragmentation.
- D . MTU should be set to 1550 or less across the data center network including inter-data center connections.
Latest 2V0-41.24 Dumps Valid Version with 107 Q&As
Latest And Valid Q&A | Instant Download | Once Fail, Full Refund
