HP HPE7-A07 Aruba Certified Campus Access Mobility Expert Written Exam Online Training
HP HPE7-A07 Online Training
The questions for HPE7-A07 were last updated at Sep 05,2024.
- Exam Code: HPE7-A07
- Exam Name: Aruba Certified Campus Access Mobility Expert Written Exam
- Certification Provider: HP
- Latest update: Sep 05,2024
Exhibit.
Which would explain this issue?
- A . HTTPS wildcard certificates are not supported
- B . HTTPS certificate is not required in ClearPass Guest.
- C . captiveportal-login aruba-training com needs to be entered m the Address field for the ClearPass Guest
- D . ".aruba-training com needs to be entered in the Address field for the ClearPass Guest
A customer is evaluating device profiles on a CX 6300 switch.
The test device has the following attributes:
• MAC address = 81:cd:93:13:ab:31
• LLDP sys-desc = iotcontroller
The test device is being assigned to the ‘’lot-dev’’ role However, the customer requires the "lot-prod’’ role be applied.
Given the configuration, what is causing the "iot-dev" role to be applied to the device’?
- A . The test device does not support CDP.
- B . The device-profile precedence order is not configured.
- C . An external RADIUS server is unreachable.
- D . The LLDP system description matches the IIdp-group configuration.
You configured" a bridgedmode SSID with WPA3-Enterprise and EAP-TLS security. When you connect an Active Directory joined client that has valid client certificates.
ClearPass shows the following error.
What is needed to resolve this issue?
- A . Enable authorization in your Authentication Method.
- B . Recreate the SSID m tunneled mode.
- C . Modify your ACX-AD authentication source to include the UPN in the search.
- D . Configure ClearPass to trust the client certificate.
Exhibit.
An engineer has applied the above configuration to R1 and R2 However the routers OSPF adjacency never progresses past the "EXSTART-DR" slate as shown below.
Which configuration action on either router will allow R1 and R2 to progress past the "EXSTART/DR" state?
- A . Change R1 and R2 to a network type of point-to-point.
- B . Remove the layer 3 MTU configuration.
- C . Ensure the OSPF process is not configured with passive-interface default.
- D . Change the IP address and mask applied to interface 1/1/1.
Exhibit.
Which statement is true?
- A . The SSID supports HR-DSSS data rates
- B . The SSID is supports 6 GHz clients.
- C . The SSID supports 802 11ax clients.
- D . The SSID supports 802 11ac clients.
You are deploying a new AOS 10 mobility gateway cluster. Due to customer requirements, the gateways must be configured with static IP addresses and are restricted from communicating using port 443 to any URLs except tor "central arubanetworks.com
How would you onboard these gateways successfully into HPE Aruba Networking Central?
A)
B)
C)
D)
- A . Option A
- B . Option B
- C . Option C
- D . Option D
You configured a tunneled SSID with captive portal and a ClearPass Guest Self Registration workflow when testing and launching the self-registration workflow, after successful registration, the login action shows the following error:
What is the best solution to resolve this error?
- A . You need to include the root and intermediate certificates in the captive portal certificate for your access points
- B . You need to De connected to the guest SSiD while testing.
- C . You need to change the Login Address in ClearPass to securelogin arubanetworKs.com
- D . You need to include the root and intermediate certificates in the captive portal certificate for your gateway
What directly affects the MCS used by wireless stations? (Select two.)
- A . SNR
- B . retry rate
- C . channel utilization
- D . number of connected clients
- E . frequency band
Which command would allow you to verity receipt of a CoA message on an AOS 10 GW?
- A . packet-capture datapath udp 3799
- B . packet-capture controipath udp 3799
- C . packet-capture interprocess udp 3799
- D . tcpdump host-port 3799
You created a new SSID with the security settings shown in the exhibit.
Some, but not all users complain that client devices are unable to connect to this SS1D.
What is the reason for this?
- A . The WPA3 Enterprise GCM-2S6 mode does not support transition mode.
- B . WPA3 Enterprise is not backward compatible with WPA2 Enterprise.
- C . MAC authentication after a failed 802. ix authentication is not possible as the option "MAC Authentication Fall-Through" is disabled.
- D . The primary servers shared key differs from the shared key configured for this server on HPE Aruba Networking Central.